Installation cutout UX700
The installation cutout has the following dimensions:
Width: 84.4 mm
Height: 106.7 mm
Installation depth: 140 mm (+ connection cable)
This cutout is present in most machines, as it complies with the EVA standard.
Dimensions of the terminal
The terminal has the following installation dimensions:
Width: 106.56 mm
Height: 146 mm
Depth from machine outer edge: 55.07 mm
Internet connection
LTE USB Stick:
The terminal is connected to the internet via the supplied LTE USB stick. Simply plug the LTE USB stick into one of the three USB ports on the back of the terminal. No further settings are required..
Router:
The terminal is connected to the Internet via the included Teltonika router.
Connect the supplied LAN cable to the silver LAN port on the back of the terminal and to the router. Then, connect the router using the supplied power cable and establish the power supply through the MDB connection.
WLAN:
The terminal can be connected to the Wi-Fi; to do this, you need to access the service page and then select the appropriate Wi-Fi in the Android settings..
Ethernet:
The terminal can also be connected to the Internet via a network cable.
The connection is located on the back of the device. The network cable is plugged into the silver LAN port.
Power supply
The terminal is powered via an MDB connector or a pinout connector.
The input voltage is 9–43 V DC (at 12 V / 0.25 A)
Manufacturer
The SENVEND Payment Terminal UX700 is manufactured by the American company Verifone, which has been one of the leading providers of payment terminals for decades.