SENVEND HELP
SENVEND UX700 –
Data & Facts
Overview
All technical data at a glance
Here you will find all the key information about the SENVEND UX700 payment terminal: protection ratings, dimensions, connections and power supply.
IP65
Protected against dust and water.
IK08
Vandal resistant.
–30 °C to +70 °C
Fully operational in any weather.
EVA standard
Easy to integrate into vending machines.
Robust
The SENVEND UX700 is protected against water and vandalism. It meets the IP65 and IK08 protection ratings and is fully operational from –30 °C to +70 °C.
Easy installation
The UX700 fits the standardised EVA installation slot, which makes it easy to install in almost any vending machine. Its shallow installation depth allows it to be fitted almost anywhere.
Reliable
The UX700 is manufactured by the American company Verifone, which has been one of the leading providers of payment terminals for decades.
Protection & Use
Built tough for continuous operation
The UX700 is designed for demanding use on vending machines – indoors and outdoors.
Protection ratings
Temperature range
Dimensions
Dimensions & installation
The cut-out follows the EVA standard and is already present in most vending machines.
Installation cut-out
Terminal dimensions
Connections & Internet
Connections on the UX700
The UX700 can be connected to the internet in several ways. All connections are located on the back of the device.
Wi-Fi
Open the service page and select the right Wi-Fi network.
LAN
Network cable into the silver LAN port on the back.
GPIO pins
For connecting additional hardware on the vending machine.
USB ports
Three USB ports on the back for additional hardware.
Accessible audio output
The headphone jack is intended for people with disabilities – it plays audio instructions.
Internet for the terminal only
The terminal can only use the internet connection for itself. Other devices cannot be supplied through it.
Power Supply
Power via MDB or pinout
The terminal is powered via an MDB connector or a pinout connector.
Connector
Input voltage
Manufacturer
Verifone
The SENVEND UX700 is manufactured by the American company Verifone, which has been one of the leading providers of payment terminals for decades.
Downloads
UX700 documents
Data sheet, drawings and manuals for the SENVEND UX700 payment terminal – to view or download.
Frequently Asked Questions
Frequently asked questions about the UX700
Can I use the terminal to provide internet to other devices?
No, the terminal can only use the internet for itself.
What happens if the terminal is damaged?
In the event of damage or a defect, contact us by email or via the contact form. We will take care of the repair and try to provide you with a replacement device.
What is the headphone jack on the terminal for?
The headphone jack is intended for people with disabilities, allowing them to hear audio instructions.
What do I need to install the terminal?
Everything you need for installation is included in the box. All you need is a Phillips screwdriver. If the mounting location does not fit directly, there are also angle adapters and surface-mount frames – both can be ordered from your specialist dealer.
Still have questions about the UX700?
Our support team will help you quickly and easily. Monday to Friday, 8:00 – 17:00 (CET).
Overview
All technical data at a glance
Here you will find all the key information about the SENVEND UX700 payment terminal: protection ratings, dimensions, connections and power supply.
IP65
Protected against dust and water.
IK08
Vandal resistant.
–30 °C to +70 °C
Fully operational in any weather.
EVA standard
Easy to integrate into vending machines.
Robust
The SENVEND UX700 is protected against water and vandalism. It meets the IP65 and IK08 protection ratings and is fully operational from –30 °C to +70 °C.
Easy installation
The UX700 fits the standardised EVA installation slot, which makes it easy to install in almost any vending machine. Its shallow installation depth allows it to be fitted almost anywhere.
Reliable
The UX700 is manufactured by the American company Verifone, which has been one of the leading providers of payment terminals for decades.
Protection & Use
Built tough for continuous operation
The UX700 is designed for demanding use on vending machines – indoors and outdoors.
Protection ratings
Temperature range
Dimensions
Dimensions and installation
The cut-out follows the EVA standard and is already present in most vending machines.
Installation cut-out
Terminal dimensions
Connections & Internet
Connections on the UX700
The UX700 can be connected to the internet in several ways. All connections are located on the back of the device.
Wi-Fi
Open the service page and select the right Wi-Fi network.
LAN
Network cable into the silver LAN port on the back.
GPIO pins
For connecting additional hardware on the vending machine.
USB ports
Three USB ports on the back for additional hardware.
Accessible audio output
The headphone jack is intended for people with disabilities – it plays audio instructions.
Internet for the terminal only
The terminal can only use the internet connection for itself. Other devices cannot be supplied through it.
Power Supply
Power via MDB or pinout
The terminal is powered via an MDB connector or a pinout connector.
Connector
Input voltage
Manufacturer
Verifone
The SENVEND UX700 is manufactured by the American company Verifone, which has been one of the leading providers of payment terminals for decades.
Downloads
UX700 documents
Data sheet, drawings and manuals for the SENVEND UX700 payment terminal – to view or download.
Frequently Asked Questions
Frequently asked questions about the UX700
Can I use the terminal to provide internet to other devices?
No, the terminal can only use the internet for itself.
What happens if the terminal is damaged?
In the event of damage or a defect, contact us by email or via the contact form. We will take care of the repair and try to provide you with a replacement device.
What is the headphone jack on the terminal for?
The headphone jack is intended for people with disabilities, allowing them to hear audio instructions.
What do I need to install the terminal?
Everything you need for installation is included in the box. All you need is a Phillips screwdriver. If the mounting location does not fit directly, there are also angle adapters and surface-mount frames – both can be ordered from your specialist dealer.
Still have questions about the UX700?
Our support team will help you quickly and easily. Monday to Friday, 8:00 – 17:00 (CET).